Linksys WIRELESS-G WVC54G User Manual download pdf

A Division of Cisco Systems, Inc.

Model No.

Quick Installation

Model No.

Wireless

WVC54G (EU/UK)

Internet Video Camera

Wireless-G

A Attach the antenna.

B Connect the included Ethernet

network cable to your router,

switch, or computer.

C Connect the other end of the

cable to the Ethernet port on

the Camera.

D Connect the included power

adapter to the Power port on

the Camera.

E Plug the power adapter into

an electrical outlet.

The Ready LED flashes while

the Camera is initializing. When

the Camera is ready for setup,

the Ready and Ethernet LEDs

are solidly lit.

F Enter a unique name for the

Camera in the Camera Name

field, and complete the

Description field. Select your

time zone, and enter the date

and time. Then click Next.

G If your network has a router or

other DHCP server, select

Automatic Configuration-

DHCP. If the Camera requires a

static IP address, keep the

default setting, Static IP

address.

Click Next.

H If you selected Automatic

Configuration-DHCP in step G,

then proceed to step I.

If you selected Static IP

address, the IP Settings screen

will appear. Enter an IP

Address, Subnet Mask, and

Default Gateway appropriate

for your network. You must

specify an IP Address and

Subnet Mask. If you are unsure

about the Default Gateway,

then leave this field blank.

Complete the Primary DNS

and/or Secondary DNS fields.

Enter at least one DNS address,

which you can obtain from

your ISP. Click Next.

A Insert the Setup CD-ROM into

your CD-ROM drive. The Setup

Wizard should run

automatically, and the

Welcome screen should

appear. If it does not, click

Start and then Run. In the field

provided, enter D:\wvc54g.exe

(if “D” is the letter of your CD-

ROM drive).

B Click Setup to begin the setup

process.

C Make sure the Camera is

properly connected to your

network. Click Next.

D The screen will display a list of

Wireless-G Internet Video

Cameras on your network and

status information. In the

Selection box, click the name

of the Camera you are

currently installing. Click Next.

E A verify password screen will

appear. In lowercase letters,

enter admin in the

Administrator Name and

Password fields. Click OK.

NOTE: The default IP address of the

Camera is 192.168.1.115.

NOTE: If you want to connect the

Camera to a wireless network for

setup, refer to the User Guide on the

Setup CD-ROM for instructions.

IMPORTANT: You MUST connect the

Camera to a router, switch, or PC* using

an Ethernet network cable BEFORE

powering on the Camera. Otherwise, the

Camera will not function.

Connect the Camera to a Wired

Network for Setup

Set up the Video Camera

Package Contents

• Wireless-G Internet Video Camera

• Camera Desktop Stand

• Detachable Antenna

• Power Adapter

• Ethernet Network Cable

• Setup CD-ROM with User Guide

•User Guide on CD

• Quick Installation Guides

• Sololink DDNS Free Trial Card

* If connecting the Camera directly to a PC, Linksys recommends that you

use an IP address of

192.168.1.x

(x can be any number from 1-254, but

cannot be the same as another device on your network).

NOTE: If your LAN IP address is

different than 192.168.1.x, you

may get an error message when

you configure the camera through

your PC. Ignore the error message.

GHz

802.11g

1 2

Summary of Contents

Page 1 - Internet Video Camera

A Division of Cisco Systems, Inc.®Model No.Quick InstallationModel No.WirelessWVC54G (EU/UK)Internet Video CameraWireless-G12A Attach the antenna.B Co

JLReview your settings before the Setup Wizard starts to copy your files. Click Next.M Click the OK button to confirm that you want to save the new se