Linksys WAP54GX User Manual download pdf (Page 13)

Chapter 3: Getting to Know the Wireless-G Access Point with SRX

The Back Panel

Wireless-G Access Point with SRX

The Back Panel

The Access Point's Ethernet network and power ports, as well as the Reset button, are located on the back panel.

Reset Button There are two ways to reset the Access Point's factory defaults. Either press the Reset button,

for approximately ten seconds, or use the Administration - Factory Defaults screen of the

Access Point's Web-based Utility.

Ethernet Port The Ethernet network port connects to an Ethernet network device, such as a switch or router.

Power Port The Power port connects to the Access Point’s power adapter.

Figure 3-2: Back Panel

port: the connection point on a computer or

networking device used for plugging in

cables or adapters

IMPORTANT: Resetting the Access Point will erase

all of your settings (including wireless security, IP

address, and power output) and replace them with

the factory defaults. Do not reset the Access Point

if you want to retain these settings.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 63 64

No comments

Linksys WAP54GX User Manual Page 13