Linksys Wireless-G Print Server WPSM54G User Manual download pdf (Page 10)

Chapter 3

Advanced Configuration

Wireless-G PrintServer

The Wireless Tab > Basic

This screen allows you to change the PrintServer’s basic

wireless settings.

Wireless > Basic

Configuration

Regulatory Domain and MAC Address The PrintServer’s

Regulatory Domain and MAC Address are listed and

cannot be changed.

SSID Enter the name of your wireless network. This is the

unique name shared by all devices in a wireless network.

The SSID is case-sensitive and should have 32 or fewer

characters.

Channel No. If your network is set to ad-hoc mode, select

your network’s channel setting. If your network is set to

infrastructure mode, keep the default, Auto.

Network Type The Network Type setting shows a choice

of two wireless modes. Select Infrastructure if you want

the PrintServer to communicate using an access point or

wireless router. Select Ad-Hoc if you want the PrintServer

to communicate without using an access point or wireless

router.

Click the Save button to apply your changes, or click the

Cancel button to cancel your changes.

The Wireless Tab > Security

Configure the wireless security of the PrintServer on this

screen. The settings you set should match the settings

of your wireless network. Wi-Fi Protected Access (WPA),

WPA2, and two levels of Wired Equivalent Privacy (WEP)

encryption are available.

If you do not want to use wireless security (not

recommended), select None from the Security Mode drop-

down menu.

Wireless > Security > None

Wireless Security

Security Mode To use WPA, select WPA Personal. To use

WPA2, which is stronger than WPA, select WPA2 Personal.

To use WEP, select the level of WEP encryption you want to

use, 64 Bit Keys (10 Hex chars) or 128 Bit Keys (26 Hex

chars), which is stronger than 64-bit WEP.

Proceed to the instructions for your security method.

WPA2 Personal

Wireless > Security > WPA2-Personal > AES

WPA Encryption Algorithm AES is the default algorithm.

TKIP is also available.

WPA Shared Key Enter your Shared Key, which must

have 8-63 characters in length.

Click the Save button to apply your changes, or click the

Cancel button to cancel your changes.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 36 37

Comments to this Manuals

No comments

Linksys Wireless-G Print Server WPSM54G User Manual Page 10

Comments to this Manuals

Related products and manuals for Printers Linksys Wireless-G Print Server WPSM54G