Linksys E4200 User's Guide download pdf (Page 20)

Maximum Performance Wireless-N Router

Linksys E4200 Chapter 2: Advanced Configuration

RADIUS

This option features WEP used in coordination with a

RADIUS server. (This should only be used when a RADIUS

server is connected to the router.)

NOTE: If you select RADIUS as your Security

Mode, each device in your wireless network

MUST use RADIUS and the same encryption

and shared key.

Wireless Security > RADIUS

RADIUS Server Enter the IP address of the RADIUS server.

RADIUS Port Enter the port number of the RADIUS

server. The default is 1812.

Shared Secret Enter the key shared between the router

and the server.

Encryption Select a level of WEP encryption, (40/64-bit

10hex digits) or 104/128-bit (26 hex digits). The default

is 40/64-bit (10 hex digits).

Passphrase Enter a passphrase to automatically generate

WEP keys. Then click Generate.

Key 1-4 If you did not enter a passphrase, enter the WEP

key(s) manually.

TX Key Select a default TX (Transmit) Key to use. The

default is 1.

Disabled

If you choose to disable wireless security, you will be

informed that wireless security is disabled when you first

attempt to access the Internet. You will given the option to

enable wireless security, or confirm that you understand

the risks but still wish to proceed without wireless security.

NOTE: When wireless security is disabled,

anyone can access your wireless network at any

time.

Wireless Security > Disabled

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 64 65

No comments

Linksys E4200 User's Guide Page 20