Linksys WIRELESS-G WRT54GS User Manual download pdf (Page 49)

Chapter 5: Configuring the Wireless-G Broadband Router

The Status Tab - Local Network

Wireless-G Broadband Router with SpeedBooster

The Status Tab - Local Network

The Local Network screen on the Status Tab displays the status of your network.

MAC Address. This is the Router’s MAC Address, as seen on your local, Ethernet network.

IP Address. This shows the Router’s IP Address, as it appears on your local, Ethernet network.

Subnet Mask. This shows the current subnet mask being configured for your local network.

DHCP Server. If you are using the Router as a DHCP server, that will be displayed here.

Start IP Address. For the range of IP Addresses used by devices on your local, Ethernet network, the beginning

of that range is shown here.

End IP Address. For the range of IP Addresses used by devices on your local, Ethernet network, the end of that

range is shown here.

DHCP Clients Table. Clicking this button will open a screen to show you which PCs are utilizing the Router as a

DHCP server. You can delete PCs from that list, and sever their connections, by checking a Delete box and

clicking the Delete button.

Figure 5-47: Status Tab - Local Network

Figure 5-48: DHCP Clients Table

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 88 89

No comments

Linksys WIRELESS-G WRT54GS User Manual Page 49