Linksys WRTU54G-TM User Manual download pdf (Page 20)

Chapter 4: Connecting the Wireless-G Broadband Router with 2 Phone Ports

SIM Card Installation

Wireless-G Broadband Router with 2 Phone Ports

SIM Card Installation

Two SIM cards are required for a 2-line configuration.

To install a SIM card, follow these steps:

1. Slide the SIM card cover down, then lift off.

2. Gently slide up the SIM card holder. Then from the bottom side, carefully lift up the SIM card holder. Do not lift

the holder until it is correctly in place or it could break.

3. Position the SIM card with the gold metal side up and towards the card slot opening. Carefully insert the SIM

card into the slot until it lines up with the bottom edge of the top piece of the holder and before it hits the

bottom piece of the holder or the SIM card or holder could break.

4. Fold down the SIM card holder and slide down into place.

5. Replace the SIM card cover. You might need to push it hard to lock it in place.

Figure 4-11: Slide Down the SIM Card Cover

Figure 4-12: Slide and Lift SIM Card Holder and Insert SIM Card

Slide up SIM card holder this

direction

Slide SIM in only this far

and not to the bottom

Bottom Side

Bottom Piece

of Holder

Top Piece of

Holder

Figure 4-13: Fold Down the SIM Card Holder and Slide into

Place

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 106 107

No comments

Linksys WRTU54G-TM User Manual Page 20