Linksys ADSL2+ User Manual download pdf (Page 20)

Chapter 5: Configuring the Wireless-N ADSL2+ Gateway

The Setup Tab

Wireless-N ADSL2+ Gateway

RFC 1483 Routed

If you are required to use RFC 1483 Routed, then select RFC 1483 Routed.

• Internet IP Address. This is the Gateway’s IP address, when seen from the WAN, or the Internet. Your ISP

will provide you with the IP Address you need to specify here.

• Subnet Mask. This is the Gateway’s Subnet Mask. Your ISP will provide you with the Subnet Mask.

• Default Gateway. Your ISP will provide you with the default Gateway Address, which is the ISP server’s IP

address.

• Primary DNS (Required) and Secondary DNS (Optional). Your ISP will provide you with at least one DNS

(Domain Name System) Server IP Address.

IPoA

If you are required to use IPoA (IP over ATM), then select IPoA.

• Internet IP Address. This is the Gateway’s IP address, when seen from the WAN, or the Internet. Your ISP

will provide you with the IP Address you need to specify here.

• Subnet Mask. This is the Gateway’s Subnet Mask. Your ISP will provide you with the Subnet Mask.

• Default Gateway. Your ISP will provide you with the default Gateway Address, which is the ISP server’s IP

address.

• Primary DNS (Required) and Secondary DNS (Optional). Your ISP will provide you with at least one DNS

(Domain Name System) Server IP Address.

Figure 5-3: RFC 1483 Routed

Figure 5-4: IPoA

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 97 98

No comments

Linksys ADSL2+ User Manual Page 20