Linksys WRT54G3G User Manual download pdf (Page 10)

10

A Static IP. If your ISP assigns you a

static IP address, select Static IP

from the drop-down menu.

Complete the Internet IP

Address, Subnet Mask, Gateway,

and DNS fields. You need to

enter at least one DNS address.

B PPPoE. If you are connecting

through PPPoE, select PPPoE from

the menu. Complete the User

Name and Password fields. Enter

the password again the Confirm

field.

C Cable (DHCP). If you are

connecting through DHCP or a

dynamic IP address from your ISP,

keep this default setting. If you

want to make changes to the

default DHCP setting, select the

appropriate Internet type and

complete the requested fields. If

you are unsure about these

settings, do not change them.

D Click Save to save your settings.

Proceed to step 7.

6

Configure the Broadband WAN

Service (Internet Port)

NOTE: If the Internet connection type

you use is not listed here, keep the default,

Cable (DHCP) for now, and click the Next

button. After you have completed the Setup

Wizard, you will use the Router’s Web-

based Utility to configure the Internet

connection type settings. Refer to the User

Guide on the Setup CD-ROM for

instructions.

A

B

C

D

1 2 ... 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments