Linksys WVC54GCA User Manual download pdf (Page 8)

Chapter 3

Setting Up and Mounting the Camera

Wireless-G Internet Home Monitoring Camera

Plug the included power adapter into the Camera’s 6.

Power port. Plug the other end into an electrical outlet.

Click Next.

Power On the Camera

Make sure the LED is lit on the Camera’s front panel. If it 7.

is not lit, make sure the cables are properly connected

to the Camera. Click Next.

Check the LED

The Wizard searches for the Wireless-G Internet Home 8.

Monitoring Camera on your network, then displays the

Camera found along with status information.

Camera Found on Network

If the Camera you want is not displayed, click Search

Again to run a new search for Cameras.

Otherwise, in the Camera List box, click the name of the

Camera you are installing. Write down the Camera’s IP

address shown in the Status box, so you can use it to

access the Web-based Utility later. Click Next.

Enter a name for the Camera. 9. Memorable names are

helpful, especially if you are using multiple Cameras

on the same network. It should have 15 characters or

fewer. After you have entered the name, click Next.

Assign the Camera Name

Select how to assign an IP Address to the Camera, 10.

either automatically or manually. Then click Next.

IP Address Settings

Automatically obtain an IP Address • Select this

option if you want to automatically assign an IP address

to the Camera using DHCP.

If you are not sure which option to choose, Linksys

recommends this option.

Set IP address configuration manually • Select

this option if you want to manually assign a static IP

address to the Camera.

If you select this option, fill in the IP Address, Subnet

Mask, and Gateway fields.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 54 55

No comments

Linksys WVC54GCA User Manual Page 8