Linksys WAP610N User Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 41
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
Chapter 3
Advanced Configuration
13
Wireless-N Access Point with Dual-Band
Before upgrading the firmware, download the Access Point’s
firmware upgrade file from www.linksysbycisco.com.
Firmware Upgrade
Please select a file to upgrade the firmware Click
Browse and select the firmware upgrade file. Then c
lick
Start to Upgrade and follow the on-screen instructions.
WARNING: The firmware upgrade must not
be interrupted; do not reboot or power off the
Access Point during the firmware upgrade..
Status > Access Point
The Access Point’s current status information is displayed.
Status > Access Point
Access Point Information
Firmware Version The Access Points current firmware
version is displayed.
Local Network
Local MAC Address The Access Point’s MAC Address, as
seen on your local, wired Ethernet network, is displayed.
Access Point IP Address The Access Points IP Address, as
seen on your local network, is displayed.
Subnet Mask The Subnet Mask configured for your local
network is displayed.
Default Gateway The Default Gateway configured for
your local network is displayed.
Status > Wireless Network
Information about your wireless network is displayed.
Status > Wireless Network
MAC Address The Access Point’s MAC Address, as seen
on your local, wireless network, is displayed.
Mode The wireless mode used by the network is
displayed.
Network Name (SSID) The wireless network name or
SSID is displayed.
Wireless Band The radio band used the Access Point is
displayed.
Channel Width The channel width setting, in MHz, is
displayed.
Wide Channel Depending on the channel settings of
your Access Point, the Wide Channel is displayed.
Standard Channel The Standard Channel setting is
displayed.
Security The security method used by the Access Point
is displayed.
SSID Broadcast The status of SSID broadcast (enabled or
disabled) is displayed.
Status > About
Information about the browser-based utility is displayed.
Status > About
Web Server
Powered By The web server of the browser-based utility
is displayed.
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 40 41

Comments to this Manuals

No comments