Linksys WAPPOE12 User Manual download pdf (Page 7)

Chapter 2

Configuration

12 Volt Power Over Ethernet Adapter Kit

Chapter 2:

Configuration

Overview

This chapter gives instructions on how to connect the

Power Over Ethernet Kit. Once connected, the Kit will

transmit data and power over the Ethernet network cable

to your remotely located network device.

The diagram shows an example of how the Kit can be

connected to a wired switch and a wireless access point.

Power

Ethernet

Wireless

Ethernet

Power

Up to 328

To connect the Kit to a device with a conventional power

port, proceed to the section, “Power on a Device that Uses

a Standard Power Adapter.” To connect the Injector to a

device that supports inline power, proceed to the section,

“Power on a Device that Uses Inline Power.”

Power on a Device that Uses a Standard

Power Adapter

Use the Injector and Splitter to power up a device that

uses a standard power adapter. Follow these instructions:

Connect the Injector’s built-in Ethernet network cable 1.

to your router, switch, or other network device.

Connect the Kit’s included Ethernet network cable to 2.

the Injector’s Power & Data OUT port.

NOTE: If this cable is not long enough, then you

can use your own Ethernet network cable.

Then connect the other end to the Splitter’s Power & 3.

Data IN port.

Connect the Splitter’s built-in Ethernet network cable 4.

to the Ethernet port of your remotely located access

point or other network device.

Connect the Splitter’s Power cord to the Power port of 5.

your remotely located access point or other network

device.

NOTE: If the plug of the Splitter’s Power cord

does not fit into your network device, then

use the included barrel jack adapter. Plug the

Splitter’s Power cord into the jack end, and plug

the other end of the barrel jack adapter into the

Power port of your network device.

Connect the Kit’s power adapter to the Injector, and 6.

plug the other end into an electrical outlet or surge

protector.

Congratulations! The installation of the 12 Volt Power

Over Ethernet Kit is complete.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comments to this Manuals

No comments

Linksys WAPPOE12 User Manual Page 7

Comments to this Manuals

Related products and manuals for WLAN access points Linksys WAPPOE12