Linksys WAP610N User Manual download pdf (Page 9)

Chapter 3

Advanced Configuration

Wireless-N Access Point with Dual-Band

Key Renewal Enter a Key Renewal period, which

instructs the Access Point how often it should change the

encryption keys. The default Key Renewal period is 3600

seconds.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

WPA2 Enterprise

This option features WPA2 used in coordination with a

RADIUS server. (This should only be used when a RADIUS

server is connected to the Access Point.)

Security Mode > WPA2 Enterprise

Encryption WPA2 supports two encryption methods,

TKIP and AES, with dynamic encryption keys. Select the

encryption method, AES or TKIP or AES. The default

selection is TKIP or AES.

RADIUS Server Enter the IP Address of the RADIUS

server.

RADIUS Port Enter the port number of the RADIUS

server. The default value is 1812.

Shared Secret Enter the key shared between the Access

Point and the server.

Key Renewal Enter a Key Renewal period, which

instructs the Access Point how often it should change the

encryption keys. The default Key Renewal period is 3600

seconds.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

WEP

WEP is a basic encryption method, which is not as secure

as WPA or WPA2.

Security Mode > WEP

Encryption Select a level of WEP encryption, 40/64 bits

(10 hex digits) or 104/128 bits (26 hex digits). The

default is 40/64 bits (10 hex digits).

Key 1 Enter the WEP key of your network.

Tx Key Key 1 is the transmit key used by the Access

Point.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Wi-Fi Protected Setup™

Wi-Fi Protected Setup™ is a feature that makes it easy

to set up your wireless network. If you have client

devices, such as wireless adapters, that support Wi-

Fi Protected Setup, then you can use Wi-Fi Protected

Setup to configure wireless security for your wireless

network. Otherwise, use manual setup (refer to

“Basic Wireless Settings (Manual)” on page 4).

Wireless > Basic Wireless Settings (Wi-Fi Protected Setup)

There are three methods available for Wi-Fi Protected

Setup. Use the method that applies to the client device

you are configuring.

1. Use Wi-Fi Protected Setup Button Use this method

if your client device has a Wi-Fi Protected Setup button.

a. Click or press the Wi-Fi Protected Setup button on

the client device.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 40 41

Comments to this Manuals

No comments

Linksys WAP610N User Manual Page 9

Comments to this Manuals

Related products and manuals for Hardware Linksys WAP610N