Linksys SPA9000 User Manual download pdf (Page 41)

Chapter 6: Using the Web-based Utility

The Voice Tab

IP Telephony System

The Voice - System Screen

This screen lets you configure system settings.

System Configuration

Restricted Access Domains. Enter the domain names permitted to access the System.

Enable Web Admin Access. This setting lets you enable or disable local access to the Web-based Utility. Select

yes or no from the drop-down menu. The default is yes.

Admin Passwd. Enter the password for the administrator. (By default, there is no password.)

User Password. Enter the password for the user. (By default, there is no password.)

Miscellaneous Settings

Syslog Server. Enter the IP address of the syslog server, which logs system information and critical events of the

System.

Debug Server. Enter the IP address of the debug server, which logs debug information of the System.

Debug Level. This determines the level of debug information that will be generated. Select 0, 1, 2, or 3 from the

drop-down menu. The higher the debug level, the more debug information will be generated. The default is 0,

which indicates that no debug information will be generated.

When you have finished making changes, click the Submit All Changes button to save the changes, or click the

Undo All Changes button to undo your changes.

Figure 6-13: Voice - System Screen

IMPORTANT: In most cases, you should not change these settings unless instructed to do by

your ITSP.

VoIPon Solutions www.voipon.co.uk [email protected] Tel: +44 (0) 1245 600560

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 127 128

No comments

Linksys SPA9000 User Manual Page 41